Add to Favorites
Share

Parts

  • Description
Product Detail

    Model
         (3AC)

    Phase

    Frequency

    Motor

    Voltage

    Current

    Max airflow

    Rated vacuum

    Rated pressure

    Sound level

    Weight

    (Hz)

    Hp    kw

    (V)

    (A)

    cfm  m³/hr

    (In.H2O mbar)

    (In.H2O mbar)

    (dB)

    (kg)

    2PB 610 H16

    Single

    50

    2.95    2.2

    200-240?,345-415Y

    9.7?,5.6Y

    156      265

    94     235

    88      220

    67

    27

    60

    3.42   2.55

    220-275?,380-480Y

    10.3?,6.0Y

    185     315

    98     245

    92      230

    70

    Usually our blowers do not require maintenance. Wearing parts service life(bearing and filters) depends on operating conditions. All machines have pre-lubricated bearing with a minimum service life of 12, 000 hours.

    During usual operation (fluid inlet and ambient temperatures not exceeding 40?, differential pressure as per nameplate data), the following routine maintenance activities have to be foreseen.

    CLEANING

    Make sure that the machine is shut down and locked against inadvertent start-up. Clean the external part of the machine with compressed air. Deposit of dust on external blower surface avoid an adequate thermal exchange and can cause an overheating of the interior.

    Clean the ventilation grid of the motor fan cover. Dirt on motor fan cover reduces the air flow and causes motor over- heating.

    Every 10/15 days during operation it is advisable to clean the filter cartridge. If the machine operate in a high dusty environment, it is necessary to replace it frequently. A dirt cartridge increases the pressure differential, the absorbed power

    and the operating temperature.

    If the machine does not produce any differential pressure, or too low pressure, or gas flow decreases, it is necessary to clean the inside of the machine. 

    Sealing rings and bearings replacement 

    The sealing rings lose the sealing capacity when exceeding their lifetime(max 2 years), thus allowing fluid losses. At that extend, sealing rings must be replaced.

    Malfunctioning occurs when the bearings exceed their lifetime(max 2 years) causing excessive noise. At that extend, bearings must be replaced.

    Early wearing of bearings may be due to:

    -Mechanical shocks during running or stop that can damage the ball rolling track.

    -Running conditions over the limit of the nameplate causing temperature increase lubrication grease damage.




    Fenglishi Industry is professional as one of the leading parts manufacturers and suppliers in China. Introducing the advanced equipment and technology from Germany, we can assure you the high quality, high precision and reliable performance of our equipment.

Send your message to this supplier
To:  

Suzhou Fenglishi Industry Co.,Ltd

* Content:  

For better quotations, include:

- A self introduction

- Special requests, if any

Quantity:  

  
Not exactly what you want? One request, multiple quotations Get Quotations Now >>